Technical data

■     80 mm diameter (country-specific available)

■     2.56 m

■     3.00 m outer track

■     3.50 m outer track

■     For better stability, the fully automatic potato harvester is equipped with a telescopic axle

■     With ROPA quick-change system

■     can be selected from 750 mm up to 900 mm

■     The two or four disk coulters (depending on options) are steplessly adjustable to the distance between them

■     The outer disk coulter in the right direction of travel can be optionally hydraulically driven, an additional disk coulter is optionally available

■     The ridge pickup is carried out with two differently configured diablo rollers

■     Two haulm intake rollers ensure smooth leaf transport

■     1,600 mm wide

■     1,488 mm wide

■     The sieve channel 1 is lined with V2A as standard

■     Shaker is hydraulically driven and speed is steplessly adjustable as standard.

■     1,450 mm wide studded rubber belt and triple deflector roller

■     1,160 mm wide studded rubber belt and twin deflector roller

■     1,300 mm triple deflector roller

■     Optional: rotating finger comb (UFK) with 4 rows of fingers

■     700 mm wide studded rubber belt and twin deflector roller

■     1,300 mm wide studded rubber belt and rotating finger comb (UFK) with four rows of fingers

■     Speed, height and angle are steplessly adjustable from the tractor seat

■     1,100 mm

■     1,900 mm

■     The picking table is designed for 5 persons

■     1,000 mm

■     5,050 mm

■     The picking table is designed for up to 8 persons

■     Generously dimensioned chutes guarantee a blockage-free removal of trash

■     Two height-adjustable platforms enable an individual adaptation to body size

■     Foldaway ladders offer an ergonomic and safe ascent and descent

■     approx. 7.5 t

■    approx. 8 t

■     2,235 mm

■     max. 4,200 mm

■     two-stage

■     steplessly adjustable

■     optimal bunker filling

■     The bunker can be equipped with an articulation unit so the fall height of the trailer can be reduced for gentle trailer filling

■     hydraulically foldable tray filler in different outflow sizes is available

■      Drive wheel for improved traction automatically actuated in the applicable travel direction

■      Ridge pickup with disk coulter and ridge roller (90 cm)

■     Ridge roller: half model, deep model, plastic model

■      Two-blade share wide for ridge distance 90 cm

■      Three-blade share

■     Center share if the middle disc coulter is not used

■      Hydraulics ready for hydraulic disk coulter/swath pickup with lifter shaft and cover belt

■     Hydraulically driven disc coulter left, center and right

■      Disk coulter right also mechanical

■      Swath pickup with lifter shaft, hydraulic cover belt and depth guide wheels

■      Share pickup for special crops (e.g. red beet) with depth guide wheels

■      Sieve conveyor 1 cleaning roller

■      Rubber paddle roller on drive shaft

■      Clod breaker for sieve conveyor 1 and 2

■      Tilt adjustment for pintle belt 4, hydraulic

■      Pintle belt pitch 40 mm, 36 mm

■      Pintle belt with H-profile on round rod instead of V-profile

■      Deflector roller package; bottom roller with spiral design (e.g. for carrots)

■      Collection box with discharge conveyor, hydraulically driven

■     Hydraulically driven rubber wheels with shredder blade

■      Bunker articulation can be hydraulically lowered

■      Tray filler funnel width 900 mm, hydraulically folding

■      Tray filler funnel width 1,900 mm, hydraulically folding

■     5.5 t overloading bunker (Classic 6 t)

■     Double bunker at Classic (proportioning 3:1)

■      Bunker walls of V2A stainless steel (standard bunker)

■      Automatic sieve conveyor controlled by driving speed incl. automatic pintle belt

■      TASK controller for crop management with ROPA terminal

■      ISOBUS retrofitting kit for tractor without preparation

■      ISOBUS control element with freely assignable AUX function in addition to the right control element

■     ROPA video switch between camera system 1 and 2

■     ROPA 12" Touch Terminal

■      LED working lights on sieving channel, pintle belt 1 to 2, picking conveyor and bunker discharge

■      1 rotating beacon

■      Canopy lights

■      Video system consisting of 1 x 7" TFT monitor with wiring kit for 4 additional camera connections

■      Additional video system consisting of 1 x 7" TFT monitor with wiring kit for 4 optional camera connections

■      Camera position sieving channel 1 to 2

■      Camera position pintle belt 1 to 2

■      Camera position wheel in direction of travel right

■      Camera position picking conveyor

■      Camera position dirt discharge conveyor

■      Camera position bunker head

■     Rear view camera

■      Canopy I - sunshade for picking table without side panels, with mounting frame

■      Canopy II - weather protection for picking table with side panels, with mounting frame

■     80 mm diameter (country-specific available)

■     2.56 m

■     3.00 m outer track

■     3.50 m outer track

■     For better stability, the potato harvester is equipped with a telescopic axle

■     With ROPA quick-change system

■     can be selected from 750 mm up to 900 mm

■     The two or four disk coulters (depending on options) are steplessly adjustable to the distance between them

■     The outer disk coulter in the right direction of travel can be optionally hydraulically driven, an additional disk coulter is optionally available

■     The ridge pickup is carried out with two differently configured diablo rollers

■     Two haulm intake rollers ensure smooth leaf transport

■     1,600 mm wide

■     1,488 mm wide

■     The sieve channel 1 is lined with V2A as standard

■     Shaker is hydraulically driven and speed is steplessly adjustable as standard.

■     1,450 mm wide studded rubber belt and triple deflector roller

■     1,300 mm triple deflector roller

■     Optional: rotating finger comb (UFK) with 4 rows of fingers

■     1,000 mm

■     5,050 mm

■     The picking table is designed for up to 8 persons

■     Generously dimensioned chutes guarantee a blockage-free removal of trash

■     Two height-adjustable platforms enable an individual adaptation to body size

■     Foldaway ladders offer an ergonomic and safe ascent and descent

■    approx. 8 t

■     2,235 mm

■     max. 4,200 mm

■     two-stage

■     steplessly adjustable

■     optimal bunker filling

■     The bunker can be equipped with an articulation unit so the fall height of the trailer can be reduced for gentle trailer filling

■     hydraulically foldable tray filler in different outflow sizes is available

■      Drive wheel for improved traction automatically actuated in the applicable travel direction

■      Ridge pickup with disk coulter and ridge roller (90 cm)

■     Ridge roller: half model, deep model, plastic model

■      Two-blade share wide for ridge distance 90 cm

■      Three-blade share

■     Center share if the middle disc coulter is not used

■      Hydraulics ready for hydraulic disk coulter/swath pickup with lifter shaft and cover belt

■     Hydraulically driven disc coulter left, center and right

■      Disk coulter right also mechanical

■      Swath pickup with lifter shaft, hydraulic cover belt and depth guide wheels

■      Share pickup for special crops (e.g. red beet) with depth guide wheels

■      Sieve conveyor 1 cleaning roller

■      Rubber paddle roller on drive shaft

■      Clod breaker for sieve conveyor 1 and 2

■      Tilt adjustment for pintle belt 4, hydraulic

■      Pintle belt pitch 40 mm, 36 mm

■      Pintle belt with H-profile on round rod instead of V-profile

■      Deflector roller package; bottom roller with spiral design (e.g. for carrots)

■      Collection box with discharge conveyor, hydraulically driven

■     Hydraulically driven rubber wheels with shredder blade

■      Bunker articulation can be hydraulically lowered

■      Tray filler funnel width 900 mm, hydraulically folding

■      Tray filler funnel width 1,900 mm, hydraulically folding

■     Classic 6 t overloading bunker

■     Double bunker at Classic (proportioning 3:1)

■      Bunker walls of V2A stainless steel (standard bunker)

■      Automatic sieve conveyor controlled by driving speed incl. automatic pintle belt

■      TASK controller for crop management with ROPA terminal

■      ISOBUS retrofitting kit for tractor without preparation

■      ISOBUS control element with freely assignable AUX function in addition to the right control element

■     ROPA video switch between camera system 1 and 2

■     ROPA 12" Touch Terminal

■      LED working lights on sieving channel, pintle belt 1 to 2, picking conveyor and bunker discharge

■      1 rotating beacon

■      Canopy lights

■      Video system consisting of 1 x 7" TFT monitor with wiring kit for 4 additional camera connections

■      Additional video system consisting of 1 x 7" TFT monitor with wiring kit for 4 optional camera connections

■      Camera position sieving channel 1 to 2

■      Camera position pintle belt 1 to 2

■      Camera position wheel in direction of travel right

■      Camera position picking conveyor

■      Camera position dirt discharge conveyor

■      Camera position bunker head

■     Rear view camera

■      Canopy I - sunshade for picking table without side panels, with mounting frame

■      Canopy II - weather protection for picking table with side panels, with mounting frame