Dimensions
Length
14.99 m
Height
4.00 m (transport position)
Width
3.00 m (6 rows with 45 cm rows)
3.30 m (6-rows at 50 cm width and 45-50 cm variable)
Unladen weight
from 33,400 kg, depending on equipment
Bunker capacity
over 43 m³ / 30 t
Diesel engine - 2 engine models available
Volvo Penta D16 700 hp/515 kW
16.12 l displacement
Volvo Penta 6-cylinder inline engine
Pump-nozzle injection (PNI)
EPA Tier 4 final exhaust gas category and exhaust gas category IV
SCR catalytic converter and AdBlue, maximum fuel sulphur content 15 ppm required to meet exhaust emission standard
max. torque 3200 Nm
Working rpm 1100 rpm, automotive to max. 1650 rpm
Volvo Penta D16, 768 hp/565 kW
16.12 l displacement
Volvo Penta 6-cylinder inline engine
Pump-nozzle injection (PNI)
WITHOUT AdBlue, WITHOUT exhaust gas recirculation
fuel with sulphur content to max. 5,000 ppm permitted
max. torque 3260 Nm
Working rpm 1100 rpm, automotive to max. 1650 rpm
not for USA and Canada
Fuel tank
1320 l diesel
Fuel consumption displayed in l/ha and l/h in terminal
AdBlue tank
145 l AdBlue
(Volvo Penta 700 hp/515 kW only)
Cooling system
Properties
side-by-side arrangement of cooling elements for charge air and water, can be folded up
CVR oil cooler and air conditioning system condenser
dirt-resistant positioning of the radiator at rear top
Hydraulic oil cooler with open fan
hydrostatically continuously driven and automatically reversible fan
Traction drive
Transmission
Traction drive with stepless CVR gearbox for efficient power traction
consisting of three hydraulic motors on the compound transmission
Properties
continuous from 0 to 40 km/h without interruption (no gear change or switching)
40 km/h in road mode at 1195 rpm, 17.5 km/h in the field at 1220 rpm
Tires
1st axle
Michelin CerexBib 1000/55 R38 (20 psi)
2nd and 3rd axle
Michelin MegaXBib 1050/50 R32 (1.9 bar)
Optional
Michelin CerexBib 1000/55 R32 (1.4 bar)
Properties
large tire contact surface protects soil and allows high operating reliability even in wet conditions and on slopes
Chassis - R-Soil Protect
Properties
innovative chassis design with oscillating front axle in conjunction with 2 hydraulically supported rear axles
slope compensation
the chassis can be inclined by 10% to the slope on each side by 6 hydraulic cylinders
the slope compensation is automatically regulated by two inclination sensors (optional)
Chassis roll stabilization
Roll stabilization due to hydraulic compensation of oil level in the stabilization cylinders of each vehicle side
Hydraulics
PDG
Pump distributor gears with pressure circulation lubrication and gear oil cooler
Traction drive
Bosch Rexroth traction drive
Operating hydraulics
generously dimensioned load-sensing working hydraulic system by Bosch Rexroth, Bucher and Hydac
Cabin
Driver's position
sound-insulated and tinted all-round windows with low horizon
quiet stepless fan in heating and ventilation system (automatic climate control)
Grammer air-spring-mounted ROPA Evolution comfort seat with heating and active ventilation
Autopilot
Cruise control
Console for telephone
AM/FM/CD/USB/Bluetooth/DAB+ Radio with external microphone for hands-free communication
14 liter cool box
Operation
R-Concept operating console
Joystick operation
Terminal
12.1" R-Touch color terminal
Machine diagnosis including DM1 error messages from the diesel engine in plain text fully integrated in R-Touch
Lighting
2 LED interior lights
Window wipers
Wide-area window wiper
Camera
Color display for rear view camera
Defoliator
PIS
Integral defoliator unit with leaf spreading between beet rows
2 depth-control wheels
PAS
all-round defoliator unit, push-button operation from the driver’s seat, can be changed for either integral topping or leaf ejection to left,
2 sensor wheels (optionally 4 sensor wheels)
PBS
Defoliator with leaf ejection to the left,
leaf-spreader and 2 depth-control wheels (optionally 4 depth-control wheels)
PES
Rubber defoliator with leaf spreading between beet rows
2 depth-control wheels
Lifting unit
RR lifting unit
6, 8 or 9 rows
45 cm, 50 cm or variable (6-row only)
hydraulic single-row adjustment of lifting depth
hydraulic stone protection
85 cm depth-control wheels
7 lifting rollers
fast stepless oscillating share drive by axial-piston motor
adjustable taper roller bearings in oscillating share drive and lifting gears
excellent view of lifting unit and scalper with no additional cameras
PR2h lifting unit
6-row
45 cm, 50 cm or variable
hydraulic stone protection
90 cm depth-control wheels
6 lifting rollers
stepless fast oscillating share drive by axial-piston motor
adjustable taper roller bearings in oscillating share drive and lifting gears
variable adjustment of roller clearance between fourth and fifth lifting roller
good view of lifting unit and scalper with no additional cameras
Maintenance position
allows the defoliator and the lifting group to be raised 90 degrees for simple inspection and service of defoliator knives, scalper knife and lifting shares
Cleaning
Infeed conveyor
800 mm wide
50 mm pitch
1st strainer wheel
1700 mm diameter
2nd and 3rd strainer wheels
1500 mm diameter
Guide grids
drop-forged strainer wheel prongs
height independently adjustable at 1st, 2nd, 3rd strainer wheel can be independently adjusted
guide grids can be replaced with spring tines segment by segment
Elevator
1000 mm wide
Electrics
vehicle power supply
24 Volt
Alternator
150 A
LED working floodlights
24 (made by Hella)
coming-home lighting
outlets
3 12 V outlets for radio, telephone etc.
Properties
CAN-bus computer system with integrated diagnosis of all components connected to the terminal
Software can be updated at USB port
Unloading conveyor
Properties
Triple-fold conveyor for even easier establishment of 10 meter-wide clamps
gentle PU fingers for high output and short unloading times
the speed of both conveyors is steplessly adjustable
long conveyor with speed switch
Unloading conveyor width
200 cm for even easier unloading to trailer
Bunker unloading
in less than one minute
Overloading height
up to 4.00 m
Yield indicator
Properties
Bunker contents are measured with 2 ultrasonic sensors
the total bunker loads (including partly loaded) are automatically recorded in the database
Equipment
standard
Central lubricating system
Fuel consumption measurement
Automatic climate control
manual slope compensation
40 km/h
Optional
Leaf spreader in stone protection mode
Skids on scalper
RR lifting unit
Widia forged lifting shares
Lifting rollers hard welded
Guide grid segments with spring tines in strainer wheels 1-3
Agitator in 2nd strainer wheel
Strainer wheel camera
Unloading conveyor camera on 2nd video display left
2 LED high-beam headlamps
Data printer
R-transfer BASIC for data export via USB interface (included in the scope of delivery: USB and WiFi interface on the R-touch color terminal) (Farmpilot cannot be used this way/R-transfer PROFESSIONAL possible with for-fee software upgrade)
R-transfer PROFESSIONAL for data import and export via USB interface and communication with Farmpilot app via WiFi (included in scope of delivery: USB and WiFi interface on the R-touch color terminal/not included in the scope of delivery: Android tablet, Farmpilot license)
R-View video system (bird's-eye view)
GPS drive speed sensor
Leaf pile equipment (defoliators with leaf scroll only)
Automatic slope compensation
Contour marking package
Additional chassis (required in Germany) maximum speed 32 km/h, 25 km/h