Dimensions
Length
14.99 m
Height
4.00 m (transport position)
Width
3.00 m (6 rows with 45 cm rows)
3.30 m (6-rows at 50 cm width and 45-50 cm variable)
Unladen weight
from 31,800 kg, depending on equipment
Bunker capacity
over 43 m³
Diesel engine
Engine
Mercedes Benz OM473LA 6-cylinder inline engine
Exhaust gas category 4 final
Power
460 kW (626 hp)
15.6 l displacement
max. torque 2,900 Nm, working rpm 1,100 rpm automotive to max. 1,650 rpm
Fuel tank
1290 l diesel, 130 l AdBlue
Fuel consumption displayed in l/ha and l/h in terminal
Cooling system
Properties
side-by-side arrangement of cooling elements for charge air and water
hinged CVR oil cooler and air conditioning system condenser
dirt-resistant positioning of the radiator at rear top
hydrostatically continuously driven and automatically reversible fan
Traction drive
Transmission
completely newly developed traction drive with stepless CVR gearbox for efficient power traction
consisting of three hydraulic motors on the compound transmission
Properties
continuous from 0 to 40 km/h without interruption (no gear change or switching)
40 km/h in road mode at 1195 rpm, 17.5 km/h in the field at 1220 rpm
Tires
1st axle
Michelin CerexBib 800/70 R38 (1.4 bar)
2nd and 3rd axle
Michelin MegaXBib 1050/50 R32 (1.9 bar)
Optional
Michelin CerexBib IF1000/55 R 32 CFO (1.4 bar)
Properties
large tire contact surface allows high operating reliability even in wet conditions and on slopes
Chassis
Properties
innovative chassis design with oscillating front axle in conjunction with 2 hydraulically supported rear axles
slope compensation
the chassis can be inclined by 10% to the slope on each side by 6 hydraulic cylinders
the slope adaptation is automatically regulated by two inclination sensors
Chassis roll stabilization
Roll stabilization due to hydraulic compensation of oil level in the stabilization cylinders of each vehicle side
Hydraulics
PDG
Pump distributor gears with pressure circulation lubrication and gear oil cooler
Traction drive
Bosch Rexroth traction drive
Operating hydraulics
generously dimensioned load-sensing working hydraulic system by Bosch Rexroth, Bucher and Hydac
Cabin
Driver's position
sound-insulated and tinted all-round windows with low horizon
more powerful stepless fan in heating and ventilation system (automatic climate control)
Grammer air-spring-mounted comfort seat with heating
Autopilot
Cruise control
Console for telephone
Bluetooth MP3 radio with audio system
14 liter cool box
Operation
R-Concept operating console
Joystick operation
Terminal
12.1" R-Touch color terminal
Machine diagnosis including DM1 error messages from the diesel engine in plain text fully integrated in R-Touch
Lighting
2 LED interior lights
Window wipers
Wide-area window wiper
Camera
Color display for rear view camera
Defoliator
PIS
Integral defoliator unit with leaf spreading between beet rows, 2 sensor wheels
PAS
All-round defoliator unit, push-button operation from the driver’s seat, can be changed for either integral topping or leaf ejection to the left, 2 depth-control wheels (optionally 4 depth-control wheels)
PBS
Defoliator unit with leaf ejection to the left, leaf-spreader and 2 depth-control wheels (optionally 4 depth-control wheels)
PES
Rubber defoliator with leaf spreading between beet rows, 2 depth-control wheels
Lifting unit
Properties
PR2 6-row lifting unit
45 cm, 50 cm or variable
with faster oscillating share drive by axial-piston motor
hydraulic stone protection
90 cm depth-control wheels
adjustable taper roller bearings in oscillating share drive and lifting gears
variable adjustment of roller clearance between fourth and fifth lifting roller
excellent view of lifting unit and scalper with no additional cameras
Maintenance position
lifts defoliator 90 degrees for simple inspection and service of defoliator knives, scalper knife and lifting shares
Cleaning
Infeed conveyor
80 cm wide
1st strainer wheel
1.7 m diameter
2nd and 3rd strainer wheels
1.5 m diameter
Elevator
1.00 m wide
Guide grid
Heights of 1st/2nd/3rd strainer wheel can be independently adjusted
guide grids can be replaced with spring tines segment by segment
Electrics
Properties
24 V vehicle power supply
150 A alternator
24 LED Hella floodlights
coming-home lighting
3 12 V outlets for radio, telephone etc.
CAN-bus computer system with integrated diagnosis of all components connected to the terminal
Software can be updated at USB port
Unloading conveyor
Properties
Triple-fold conveyor for even easier establishment of 10 meter-wide clamps
gentle PU fingers for high output and short unloading times
the speed of both conveyors is steplessly adjustable
long conveyor with speed switch
Unloading conveyor width
200 cm for even easier unloading to trailer
Bunker unloading
in less than one minute
Overloading height
up to 4.00 m
Yield indicator
Properties
Bunker contents are measured with 2 ultrasonic sensors
the total bunker loads (including partly loaded) are automatically recorded in the database
Equipment
standard
Central lubricating system
Fuel consumption measurement
Automatic climate control
manual slope compensation
40 km/h
Optional
Leaf spreader in stone protection mode
Skids on scalper
Widia forged lifting shares
Lifting rollers hard welded
Guide grid segments with spring tines in strainer wheels 1-3
Agitator in 2nd strainer wheel
Strainer wheel camera
Unloading conveyor camera
2nd video display
2 LED high-beam headlamps
Data printer
via WiFi Connect: R-Transfer Basic with data export to ROPA app or USB stick, R-Transfer Professional with data import and export from and to ROPA app or USB stick.
R-View video system (bird's-eye view)
Distance Control Assistant (not with R-View)
GPS drive speed sensor
Leaf pile equipment (defoliators with leaf scroll only)
Automatic slope compensation
Contour marking package
Additional chassis (required in Germany)