Technical data Panther 2S
Dimensions
Length
13.53 m
Height
3.00 m
Width
3.00 m (6 rows with 45 cm rows)
3.30 m (6-rows at 50 cm width and 45-50 cm variable)
> 3.30 m (with RR-XL depending on the size of the lifting unit)
Bunker capacity
approx. 39 cubic yards / 21 t
Diesel engine - 2 engine models available
Motor Panther 2Sd - Volvo Penta TWD1683VE
796 PS / 585 kW
16.12 l displacement
6-cylinder inline engine
Common-rail injection
fulfills EU level 5
USA TIER 4f
with SCR cat and AdBlue
Maximum fuel sulphur content 15 ppm required to meet exhaust emission standard
Max. torque 3,650 Nm, 3,550 Nm from as low as 1,000 rpm, working speed 1,100 rpm, automotive up to max. 1,650 rpm
Motor Panther 2Sa - Volvo Penta TAD1643VE-B
565 kW (768 hp)
16.12 l displacement
6-cylinder inline engine
Pump-nozzle injection (PNI)
w/o AdBlue
w/o exhaust gas recirculation
fuel with sulphur content to max. 5,000 ppm permitted
Max. torque 3,260 Nm, working speed 1,100 rpm, automotive to max. 1,650 rpm
(not for USA and Canada)
Fuel tank
1,300 l diesel
Fuel consumption displayed in l/ha and l/h in terminal
AdBlue tank
145 l AdBlue
(only on Panther 2Sd)
Cooling system
Properties
Lying in side-by-side arrangement of cooling elements for charge air and water
Foldable hinged CVR oil cooler and air conditioning system condenser
dirt-resistant positioning of the radiator at rear top
Hydraulic oil cooler with open fan
Hydrostatically continuously driven and automatically reversible fan
Traction drive
First gear
0 - 10 mph (at 1400 rpm of diesel engine)
Second gear
0 - 25 mph (at 1265 rpm of diesel engine)
Transmission
Transmission and axle ratios for low speed of straight cardan shafts
Two braked portal axles with cooled differential gears
Planetary final drive with 19-hole bolt pitch circle (500 mm diameter) with 4 planetary gears
Chassis – Anti Shake and Balance System
Properties
An innovative chassis concept with 2 floating axles in conjunction with 4 stabilizing cylinders
Slope compensation - R-Balance
The chassis can be inclined by 7% to the slope on each side by 4 hydraulic cylinders
Automatic slope adaption by a 3-axis gyroscope with acceleration measurement for centrifugal force compensation (optional)
Chassis roll stabilization
By hydraulic compensation of the oil level in the stabilization cylinders on one side of the vehicle
Tires
1st axle
Michelin IF 800/70 R38 CerexBib2
2st axle
Michelin IF 900/60 R38 CerexBib2
Properties
large tire contact surface protects soil and allows high operating reliability even in wet conditions and on slopes
Hydraulics
Pump distributor gears
With pressure circulation lubrication and gear oil cooler
Traction drive
Bosch Rexroth traction drive
Operating hydraulics
Generously dimensioned load-sensing working hydraulic system by Bosch Rexroth, Bucher and Hydac
Cabin
Driver's position
Sound-insulated and tinted all-round windows with low horizon
quiet stepless fan in heating and ventilation system (automatic climate control)
GRAMMER air-spring-mounted ROPA Evolution comfort seat with heating and active ventilation
Autopilot
Cruise control
Console for telephone
AM/FM/CD/USB/Bluetooth/DAB+ Radio with external microphone for hands-free communication, 14-liter cool box
Operation / terminal
12.1" R-Touch display on the operating console
12.1" R-Touch display on the left A-pillar
Multi-function joystick on the right with programmable buttons
Bunker operating control with joystick molded recess on the left armrest
Machine diagnosis including DM1 error messages from the diesel engine in plain text fully integrated
Lighting
2 LED interior lights
Window wipers
Wide-area window wiper
Defoliator/rubber defoliator:
Integral topper
Rubber defoliator with leaf spreading between beet rows
Available with or without depth-control wheels
All-round topper
Push-button operation from the driver’s seat, can be changed for either integral topping or leaf ejection to left
Available with or without depth-control wheels
Topper with leaf ejection
For side leaf ejection (left)
With leaf augur and leaf plate
4 fixed depth-control wheels
Only available in 45 cm (only in particular countries due to regulations)
Rubber-defoliator
Rubber defoliator with leaf spreading between beet rows
2 depth-control wheels
Lifting unit
RR lifting unit
6, 8 or 9 rows
45 cm, 50 cm or variable (6-row only)
Hydraulic share depth adjustment of the individual rows
hydraulic stone protection
Depth-control wheels ø 85 cm
7 lifting rollers
fast stepless oscillating share drive by axial-piston motor
adjustable taper roller bearings in oscillating share drive and lifting gears
excellent view of lifting unit and scalper with no additional cameras
Maintenance position
The convenient maintenance position lifts the defoliator and the lifting group 90 degrees for simple inspection and service of defoliator knives, scalper knife and lifting shares
scalper knife and lifting shares
Cleaning
Infeed conveyor
800 mm wide
50 mm pitch
1st strainer wheel
1,740 mm diameter
Strainer wheel with forged tines
6 offset strainer wheel tines
2nd and 3rd strainer wheels
1,550 mm diameter
Strainer wheel with forged tines
4 offset strainer wheel tines
Strainer grid
height independently adjustable at 1st, 2nd, 3rd strainer wheel can be independently adjusted
guide grids can be replaced with spring tines segment by segment
Elevator
1,000 mm wide
Electrics
vehicle power supply
24 Volt
Alternator
150 A
Safety
Electronic main battery switch with automatic shut-off after ignition OFF for 5 days
outlets
In the seat console:
1x 12V power outlet
1 x 24V outlet
USB double socket 5V / 3.6A (USB-A and USB-C)
In the roof console:
USB double socket 5V / 3.6A (USB-A and USB-C)
In the engine compartment:
1 x 24V outlet
Properties
Diagnostic system for all sensors and actuators integrated in both R-Touch displays
Warnings are displayed as icon with text in the applicable language
Software updates can be uploaded via standard USB port
Long-lasting, waterproof, anticorrosion structure of on-board electrical system
Single-lead sealed plugs (AMP, German) used exclusively
Central electrical system wired with WAGO spring-clamp terminals (vibration-proof)
4 identical Hydac TTC 580 modules and 2 Hydac TTC 30 modules (can be replaced if pin is not assigned!)
Wiring harness mostly wrapped with protective covering
Lighting
Headlights
2 Hella C140 LED main headlights at the front on the defoliator unit
6 LED working floodlights (1,700 lumen) Hella LED Oval 90 on cabin roof
18 LED working floodlights (1,800 lumen) Nordic Lights
4 LED spotlights for lighting the engine compartment
Properties
Coming-home function
Rotating beacons
Hella RotaLED Compact
Unloading conveyor
Properties
Triple-foldable
for even easier establishment of 10 meter-wide clamps
gentle PU fingers for high output and short unloading times
Bunker unloading
in less than one minute
Overloading height
up to 4.00 m
Unloading conveyor width
1600 mm for even easier unloading to trailer
Yield indicator
Properties
2 ultrasound sensors measure the bunker content, full bunkers (and partly loaded bunkers) are added up and automatically recorded in the database
Equipment
Standard equipment
Central lubricating system
Fuel consumption measurement
Automatic climate control
1 digital camera as rear view camera
1 digital camera for strainer wheels unit
R-Connect telematics module including SIM card
Hard-coated scalper flails
Lifting rollers with a hard-welded finish
40 km/h
Manual slope compensation R-Balance
Other equipment options
Automatic slope compensation R-Balance
R-Contour (automatic share depth adjustment of the individual rows with ground contour recording)
R-Trip (automatic scalper height adjustment)
Reinforced defoliator hood
Defoliator with combi shaft instead of standard defoliator shaft
Leaf spreader in stone protection mode
Leaf pile equipment (only for all-round toppers and defoliators with leaf ejection)
Scalper inflow sheet with skid
Widia forged lifting shares
Various models of lifting rollers
Data printer
R-Transfer PROFESSIONAL
R-Transfer BASIC
R-View video system (bird's-eye view)
1 digital camera for infeed conveyor
1 digital camera for unload conveyor
1 digital camera for sugar beet crop on cabin roof
R-Connect Monitor
Slip-free driving speed measurement
4 Hella LED headlights (4,500 lumen apiece) on the mirror brackets
Strainer wheel segments optionally with spring tines or guide grids on strainer wheels 1-3
Agitator in 2nd strainer wheel
Push-off grid 2nd strainer wheel in standard, stone or spring tine design
Limit sensor on diesel tank
Additional chassis (required in Germany)
Additional axle on chassis behind the rear axle (mandatory in Germany)
Reduction of maximum speed from 40 km/h to 32 km/h
Chicory equipment
Contour marking package
For delivery within the EU/Europe incl. TÜV Certificate according to § 21 German Road Traffic Licensing Regulations. Conforms to Machinery Directive 2006/42/EC (CE marking) and the requirements of the employers' liability insurance association. Subject to technical changes.
Existing protective covers have been partially dismantled for better imaging. The machine must not be operated without these covers! Made in Germany.