Dimensions
Length
14.99 m
Height
4.00 m (transport position)
Width
3.00 m (6 rows with 45 cm rows)
3.30 m (6-rows at 50 cm width and 45-50 cm variable)
> 3.30 m (with RR-XL depending on the size of the lifting unit)
Unladen weight
from 33,400 kg, depending on equipment
Bunker capacity
over 43 m³ / 30 t
Diesel engine - 2 engine models available
VOLVO PENTA TWD1683VE
796 hp/585 kW
16.12 l displacement
Volvo Penta 6-cylinder inline engine
common rail injection
emission level EU 5, USA TIER 4f, with SCR catalytic converter and AdBlue, maximum fuel sulphur content 15 ppm required to meet exhaust emission standard
max. torque 3,650 Nm, 3,550 Nm from as low as 1,000 rpm, working speed 1,100 rpm, automotive up to max. 1,650 rpm
VOLVO PENTA TAD1643VE-B
565 kW (768 hp)
16.12 l displacement
Volvo Penta 6-cylinder inline engine
pump-nozzle injection (PNI)
WITHOUT AdBlue, WITHOUT exhaust gas recirculation
fuel with sulphur content to max. 5,000 ppm permitted
max. torque 3,260 Nm, working speed 1,100 rpm, automotive up to max. 1,650 rpm
not for USA and Canada
Fuel tank
1,320 l diesel
fuel consumption displayed in l/ha and l/h in terminal
AdBlue tank
145 l AdBlue
(Volvo Penta TWD1683VE - 796 hp / 585 kW only)
Cooling system
Features
flat side-by-side arrangement of cooling elements for charge air and water
hinged CVR oil cooler and air conditioning system condenser
dirt-resistant positioning of the radiator at rear top
hydraulic oil cooler with open fan
hydrostatically continuously driven and automatically reversible fan
Traction drive
Gears
traction drive with stepless CVR gearbox for efficient power traction
consisting of three hydraulic motors on the compound gearbox
Features
continuous from 0 to 40 km/h without interruption (no gear change or switching)
40 km/h in road mode at 1,200 rpm, 17.5 km/h in the field at 1,240 rpm
Tyres
1st axle:
Michelin CerexBib2 IF 800/70 R38 (1.4 bar)
2nd and 3rd axle:
Michelin MegaXBib 1050/50 R32 (1.9 bar)
Optional
Michelin CerexBib 1000/55 R32 (1.4 bar)
Features
large tyre contact surface protects soil and allows high operating reliability even in wet conditions and on slopes
Chassis - R-Soil Protect
Features
patented chassis design with oscillating front axle in conjunction with 2 hydraulically supported rear axles
Slope adaptation - R-Balance
Features
the chassis can be inclined by 10% to the slope on each side by 6 hydraulic cylinders
automatic slope compensation by a 3-axis gyroscope with acceleration measurement for centrifugal force compensation (optional)
Chassis roll stabilisation
roll stabilisation by hydraulic compensation of the oil level in the stabilisation cylinders on one side of the vehicle
Hydraulics
Pump distributor gears
with pressure circulation lubrication and gear oil cooler
Traction drive
Bosch Rexroth traction drive
Operating hydraulics
well dimensioned load-sensing working hydraulic system by Bosch Rexroth, Bucher and Hydac
Cabin
Driver's position
sound-insulated and tinted all-round windows with low horizon
quiet stepless fan in heating and ventilation system (automatic climate control)
Grammer air-spring-mounted ROPA Evolution comfort seat with heating and active ventilation
autopilot
cruise control
console for telephone
AM/FM/CD/USB/Bluetooth/DAB+ Radio with external microphone for hands-free communication
14 litre cool box
Operation
R-Touch
multifunctional joystick right with programmable keys
bunker control element with joystick grip on the left armrest
Terminal
12.1“ R-Touch display on the operating console
12.1“ R-Touch display on the left A-pillar
fully integrated machine diagnosis including DM1 error messages from the diesel engine in plain text
Lighting
2 LED interior lights
Window wipers
wide-area window wiper
Camera
the relevant camera image is automatically displayed on the left R-Touch display while reversing or when unloading the bunker.
Topper/rubber topper
RIS
integral defoliator unit with leaf spreading between beet rows
2 depth-control wheels
RISU
integral defoliator unit with leaf spreading between beet rows
without depth-control wheels
RAS
all-round defoliator unit, push-button operation from the driver’s seat, can be changed for either integral topping or leaf ejection to left
2 depth-control wheels (optionally 4 depth-control wheels)
RBSO
defoliator with side leaf ejection to the left
leaf auger and leaf spreader
4 rigid depth-control wheels
only available in 45 cm
(only permitted in certain countries due to legislation)
RES
rubber defoliator with leaf spreading between beet rows
2 depth-control wheels
Lifting unit
RR lifting unit
6, 8 or 9 rows
45 cm, 50 cm or variable (6-row only)
hydraulic share depth adjustment of the individual rows
hydraulic stone protection
85 cm depth-control wheels
7 lifting rollers
fast stepless oscillating share drive by axial-piston motor
adjustable taper roller bearings in oscillating share drive and lifting gears
excellent view of lifting unit and scalper with no additional cameras
Maintenance position
allows the defoliator and the lifting group to be raised 90 degrees for simple inspection and service of defoliator knives, scalper knife and lifting shares
Cleaning
Infeed conveyor
800 mm wide
50 mm pitch
1st strainer wheel
1,740 mm diameter
strainer wheel with forged tines
6 offset strainer wheel tines
2nd and 3rd strainer wheels
1,500 mm diameter
strainer wheels with forged tines
4 offset tines each strainer wheel
Guide grids
height independently adjustable at 1st, 2nd, 3rd strainer wheel can be independently adjusted
guide grids can be replaced with spring tines segment by segment
Elevator
1,000 mm wide
Electrical system
Vehicle power supply
24 volt
Generator
150 A
Outlets
12 V socket on seat console, 1 pc.
24 V socket on seat console, 1 pc.
USB double socket 5V / 3.6A (USB-A and USB-B), 2 pcs.
Features
CAN-bus computer system with integrated diagnosis of all components connected to the terminal
software can be updated at USB port
Lighting
Headlights
2 pcs. Hella C140 LED main headlights at the front on the defoliator unit
6 pcs. LED working headlights (1,700 lumen) Hella LED Oval 90 on the cabin roof
23 pcs. LED working floodlights (1,800 lumen) Nordic Lights
4 pcs. LED spotlights for lighting the engine compartment
Rotating beacons
Hella RotaLED Compact
Features
coming-home function
Unloading conveyor
Features
triple-fold conveyor for even easier establishment of 10-metre-wide clamps
gentle PU fingers for high output and short unloading times
the speed of both conveyors is steplessly adjustable
long conveyor with speed switch
Unloading conveyor width
200 cm for even easier unloading to trailer
Bunker unloading
in less than one minute
Overloading height
up to 4.00 m
Yield indicator
Features
bunker contents are measured with 2 ultrasonic sensors
All bunker loads (including partial) are automatically recorded in the database
Equipment
Standard equipment
central lubricating system
fuel consumption measurement
automatic climate control
1 digital camera as rear view camera
1 digital camera for strainer wheels unit
R-Connect telematics module incl. SIM card
hard-coated scalper flails
lifting rollers with a hard welded-on finish
cleaner on elevator rubber
40 km/h
manual slope compensation R-Balance
Other equipment options
automatic slope compensation R-Balance
R-Contour (automatic share depth adjustment of single rows by ground contour detection)
R-Trim (automatic defoliator height adjustment)
reinforced defoliator plate for integral defoliator
topper with combined shaft instead of standard topper shaft
leaf spreader in stone protection mode
leaf pile equipment (only at defoliators with leaf ejection)
inflow sheet with skid on scalper
Widia forged lifting shares
data printer
R-Transfer PROFESSIONAL
R-Transfer BASIC
R-View video system (bird's-eye view)
1 digital camera for infeed conveyor
1 digital camera for unload conveyor
1 digital camera for beet crop on cabin roof
R-Connect Monitor
non-slip speed measurement
2 LED high-beam headlamps (4,200 lumen each) on mirror brackets
4 LED high-beam headlamps (4,500 lumen each) on mirror brackets
strainer wheel segments optionally with guide grids or spring tines on strainer wheels 1-3
agitator in the 2nd strainer wheel
2nd strainer wheel discharge grid in standard, stone protection or spring tine model
limit sensor on diesel tank
additional chassis (obligatory in Germany)
reduction of maximum speed from 40 km/h to 32 km/h
chicory equipment
contour marking package