Dimensions
Length
13.40 m
Height
4.00 m (transport position)
Width above all
3.00 m (6 rows with 45 cm rows)
3.30 m (6-rows at 50 cm width and 45-50 cm variable)
Bunker capacity
over 28 m³ / 20 t
Turning radius
6.50 m inner diameter
Diesel engine
Engine
Mercedes Benz OM 471 LA 6-cylinder inline engine
EUROMOT 4 exhaust gas category
Capacity
390 kW (530 hp)
12.8 l displacement
max. torque 2,450 Nm, working rpm 1,175 rpm automotive to max. 1,650 rpm
Fuel tank
fuel consumption displayed in l/ha and l/h in terminal
1,125 l diesel, 130 l AdBlue
Cooling system
Features
side-by-side arrangement of cooling elements for charge air and water
dirt-resistant positioning of the radiator at rear top
hydrostatically continuously driven and automatically reversible fan
Traction drive
First gear
0 - 15 km/h lifting speed
Second gear
0 - 32 km/h Completely redesigned traction drive with two braked portal axles and new planetary gears (500 mm hole circle) with 4 planetary gear wheels
Features
straight guide drive shafts
no ancillary drive gear for very high torque to the high wheels
Tyres
1st axle:
800/70 R 38
2nd axle:
900/60 R 38
Features
large wheel diameter 205 cm
extremely soil-protecting and flexible Michelin tyres with Ultraflex technology
only 2 bar tyre pressure with full bunker load
large tyre contact surface allows high operating reliability even in wet conditions and on slopes
Slope compensation
Features
the chassis can be inclined by about 7% to the slope on each side by 4 hydraulic cylinders
the slope compensation is automatically regulated by an electronic system
Hydraulics
PDG
pump distributor gears with pressure circulation lubrication and gear oil cooler
Traction drive
Bosch Rexroth traction drive with 280 ccm drive pump
Operating hydraulics
well dimensioned load-sensing working hydraulic system by Bosch Rexroth, Bucher and Hydac
Cabin
Driver's position
new cabin damping with hydraulic dampers
sound-insulated and tinted all-round windows with low horizon
Heating and ventilation system (automatic climate control)
Grammer air-spring-mounted comfort seat with heating
autopilot
cruise control
console for telephone
Bluetooth MP3 radio with audio system
Operation
R-Concept operating console
Joystick operation
Terminal
12.1" R-Touch colour terminal
Machine diagnostics, including diesel engine fully integrated in display
Lighting
2 LED interior lights
Window wipers
wide-area window wiper
Camera
Video monitor with standard reversing camera
Defoliator
PIS
Integral defoliator unit with leaf spreading between beet rows, 2 sensor wheels
PAS
All-round defoliator unit, push-button operation from the driver’s seat, can be changed for either integral topping or leaf ejection to the left, 2 depth-control wheels (optionally 4 depth-control wheels)
PBS
Defoliator unit with leaf ejection to the left, leaf-spreader and 2 depth-control wheels (optionally 4 depth-control wheels)
PES
Rubber defoliator with leaf spreading between beet rows, 2 depth-control wheels
Lifting unit
Features
PR2 6-row lifting unit
45 cm, 50 cm or variable
with faster oscillating share drive by axial-piston motor
hydraulic stone protection
90 cm depth-control wheels
adjustable taper roller bearings in oscillating share drive and lifting gears
variable adjustment of roller clearance between fourth and fifth lifting roller
excellent view of lifting unit and scalper with no additional cameras
Maintenance position
lifts defoliator 90 degrees for simple inspection and service of defoliator knives, scalper knife and lifting shares
Cleaning
Infeed conveyor
80 cm wide
50 mm pitch
1st strainer wheel
170 cm diameter
2nd and 3rd strainer wheels
150 cm diameter
Elevator
100 cm wide
Guide grid
Heights of 1st, 2nd, 3rd strainer wheel can be independently adjusted
guide grids can be replaced with spring tines segment by segment
Electrical system
Features
24 V vehicle power supply
150 A alternator
24 LED Hella floodlights
coming-home lighting
3 12 V outlets for radio, telephone etc.
CAN-bus computer system with integrated diagnosis of all components connected to the terminal
software can be updated at USB port
Unloading conveyor
Features
triple-fold conveyor for even easier establishment of 10-metre-wide clamps
15 cm fingers for high feeding capacity and short unloading times
Unloading conveyor width
140 cm for even easier unloading to trailer
Bunker unloading
in less than one minute because the conveyor has a down slope to the unloading conveyor
Overloading height
up to 4.00 m
Yield indicator
Features
Bunker contents are measured with 2 ultrasonic sensors
the total bunker loads (including partly loaded) are automatically recorded in the field database
Equipment
Standard
central lubricating system
fuel consumption measurement
automatic climate control
Optional
leaf spreader in stone protection mode
skids on scalper
Widia forged lifting shares (Betek)
hard-welded lifting rollers
Guide grid segments with spring tines in strainer wheels 1-3
agitator in the 2nd strainer wheel
strainer wheel camera
Unloading conveyor camera
2nd LCD colour monitor
2 LED high-beam headlamps
data printer
R-Transfer with data export via Wi-Fi Connect to the ROPA app or USB stick
Data import to order management
Distance Control Assistant
GPS drive speed sensor
leaf pile equipment (defoliators with leaf scroll only)
Biodegradable hydraulic oil
Manual slope compensation
automatic slope compensation
32 km/h version
Additional axles (required in Germany)