Dimensions
Length
13.53 m
Height
4.00 m (transport position)
Width
3.00 m (6 rows with 45 cm rows)
3.30 m (6-rows at 50 cm width and 45-50 cm variable)
Bunker capacity
over 30 m³ / 21 t
Turning radius
6.70 m inner diameter
Diesel engine - 2 engine models available
Volvo Penta D16 700 hp/515 kW
16.12 l displacement
Volvo Penta 6-cylinder inline engine
pump-nozzle injection (PNI)
EPA Tier 4 final exhaust gas category and exhaust gas category IV
SCR catalytic converter and AdBlue, maximum fuel sulphur content 15 ppm required to meet exhaust emission standard
max. torque 3200 Nm
working rpm 1,100 rpm, automotive to max. 1,650 rpm
Volvo Penta D16, 768 hp/565 kW
16.12 l displacement
Volvo Penta 6-cylinder inline engine
pump-nozzle injection (PNI)
WITHOUT AdBlue, WITHOUT exhaust gas recirculation
fuel with sulphur content to max. 5,000 ppm permitted
max. torque 3260 Nm
working rpm 1,100 rpm, automotive to max. 1,650 rpm
not for USA and Canada
Fuel tank
1300 l diesel
fuel consumption displayed in l/ha and l/h in terminal
AdBlue tank
145 l AdBlue
(Volvo Penta 700 hp/515 kW only)
Cooling system
Features
flat side-by-side arrangement of cooling elements for charge air and water
dirt-resistant positioning of the radiator at rear top
hydrostatically continuously driven and automatically reversible fan
Traction drive
1st gear
0 - 16.5 km/h (at 1,400 rpm of diesel engine)
2nd gear
0 - 40 km/h (at 1,265 rpm of diesel engine)
Features
New transmission and axle ratios for low speed of straight drive shafts
two braked portal axles with cooled differential gears
planetary final drive with 19-hole bolt pitch circle (500 mm diameter) with 4 planetary gears
Tyres
1st axle:
Michelin IF 800/70 R38 CerexBib2
2st axle:
Michelin IF 900/60 R38 CerexBib2
Features
Large wheel diameter 2,050 cm
Extremely soil-protecting and flexible Michelin tyres with Ultraflex technology
Only 2 bar tyre pressure with full bunker load
Large tyre contact surface allows high operating reliability even in wet conditions and on slopes
Chassis - R-Soil Protect
Features
New chassis concept with 2 swing axles with stabilisation cylinders
Slope compensation
The chassis can be inclined by about 7% to the slope on each side by 4 hydraulic cylinders
The slope compensation is automatically regulated by two inclination sensors (optional)
Chassis roll stabilisation
Roll stabilisation by hydraulic compensation of the oil level in the stabilisation cylinders on one side of the vehicle
Hydraulics
PDG
pump distributor gears with pressure circulation lubrication and gear oil cooler
Traction drive
Bosch Rexroth traction drive with 280 ccm drive pump
Operating hydraulics
well dimensioned load-sensing working hydraulic system by Bosch Rexroth, Bucher and Hydac
Cabin
Driver's position
sound-insulated and tinted all-round windows with low horizon
quiet stepless fan in heating and ventilation system (automatic climate control)
Grammer air-spring-mounted ROPA Evolution comfort seat with heating and active ventilation
autopilot
cruise control
console for telephone
AM/FM/CD/USB/Bluetooth/DAB+ Radio with external microphone for hands-free communication
14 litre cool box
Operation
R-Concept operating console
Joystick operation
Terminal
12.1" R-Touch colour terminal
Machine diagnosis including DM1 error messages from the diesel engine in plain text, fully integrated in R-Touch
Lighting
2 LED interior lights
Window wipers
wide-area window wiper
Camera
colour display for rear view camera
Defoliator
RIS
integral defoliator unit with leaf spreading between beet rows
2 depth-control wheels
RAS
all-round defoliator unit, push-button operation from the driver’s seat, can be changed for either integral topping or leaf ejection to left
2 depth-control wheels (optionally 4 depth-control wheels)
RBS
Defoliator with leaf ejection to the left, leaf-spreader and 4 depth-control wheels
RES
rubber defoliator with leaf spreading between beet rows
2 depth-control wheels
Lifting unit
RR lifting unit
6, 8 or 9 rows
45 cm, 50 cm or variable (6-row only)
Hydraulic single-row adjustment of lifting depth
Hydraulic stone protection
85 cm depth-control wheels
7 lifting rollers
fast stepless oscillating share drive by axial-piston motor
adjustable taper roller bearings in oscillating share drive and lifting gears
excellent view of lifting unit and scalper with no additional cameras
Maintenance position
Allows the defoliator and the lifting group to be raised 90 degrees for simple inspection and service of the defoliator flails, scalper flails and lifting shares
Cleaning
Infeed conveyor
800 mm wide
50 mm pitch
1st strainer wheel
1,740 mm diameter
2nd and 3rd strainer wheels
1,550 mm diameter
Guide grids
forged strainer wheel tines
height independently adjustable at 1st, 2nd, 3rd strainer wheel can be independently adjusted
guide grids can be replaced with spring tines segment by segment
Elevator
1,000 mm wide
Electrical system
Vehicle power supply
24 V vehicle power supply
Generator
150 A
LED working floodlights
24 (made by Hella)
coming-home lighting
Outlets
3 12 V outlets for radio, telephone etc.
Features
CAN-bus computer system with integrated diagnosis of all components connected to the terminal
software can be updated at USB port
Unloading conveyor
Features
triple-fold conveyor for even easier establishment of 10-metre-wide clamps
PU fingers 110 mm long for high output and short unloading times
Unloading conveyor width
1,600 mm for even easier unloading to trailer
Bunker unloading
in less than one minute
Overloading height
up to 4.00 m
Yield indicator
Features
bunker contents are measured with 2 ultrasonic sensors
All bunker loads (including partial) are automatically recorded in the database
Equipment
Standard
central lubricating system
fuel consumption measurement
automatic climate control
manual slope compensation
40 km/h
Optional
leaf spreader in stone protection mode
Reinforced defoliator plates for integrated defoliator
skids on scalper
Widia forged lifting shares
hard-welded lifting rollers
Guide grid segments with spring tines in strainer wheels 1-3
agitator in the 2nd strainer wheel
strainer wheel camera
Unloading conveyor camera on 2nd video display left
2 LED high-beam headlamps
data printer
R-Transfer BASIC for data export via USB port (scope of delivery: USB and Wi-Fi interface in R-Touch color terminal) (farmpilot can not be run / software update to R-Transfer PROFESSIONAL possible for additional costs)
R-Transfer PROFESSIONAL for data import and export via USB port and communication with farmpilot app via Wi-Fi (scope of delivery: USB and Wi-Fi interface in R-Touch color terminal / not included: Android tablet, farmpilot licence)
R-View video system (bird's-eye view)
GPS drive speed sensor
leaf pile equipment (defoliators with leaf scroll only)
automatic slope compensation
contour marking package
Maximum speed limited to 32 km/h, 25 km/h
Automatic slope compensation
limit sensor on diesel tank
Elevator for chicory harvesting